Tips to Customize IKEA Pax Wardrobes with Trim

In the event you’ve purchased an IKEA Pax wardrobe (right here’s how I constructed mine into the wall) and are on the lookout for concepts or recommendations on how one can make them look a bit of extra customized and costly, look no additional than including customized trim to your wardrobe doorways!

Including trim is a fast option to take a set of Pax wardrobes from wanting inventory to stylish, and you may customise your doorways to suit your house’s character.

Love a very good IKEA hack? Try:

Provides:
–drill
–painter’s tape
–degree
–14″ wood circle
-straight half spherical molding (I did a 3/8″ x 3/4″ measurement moulding)
-half spherical versatile molding (I did this 3/8″x 3/4″ measurement versatile moulding)
–miter noticed or hand noticed and a miter field
–craft noticed
–end nail gun (I really like that battery one however this one is a bit more finances pleasant) and three/4″ brad nails
–wooden filler and high-quality sandpaper
–caulk
-paint primer (use this one so that you don’t must sand the laminate doorways first)
-acrylic paint (with a spindle brush if you happen to can as they’re tremendous useful for portray moulding)

*Observe: I like this website quite a bit for versatile moulding, as they’ve a lot of sizes and you will get it pre-bent right into a circle, which is actually useful because the materials could be powerful to bend from straight.

In the event you get confused on methods to order it, they’re actually useful over the cellphone.

This sort of door model works greatest with a single knob to your door {hardware}, and it’s often positioned in the midst of the door. So add your {hardware} first so you may construct round it. Knobs like this work nice!

Now, we’ll need to use our wood circle for our arch information. Drill a gap in the midst of your circle that’s the identical measurement as your door deal with screw, so you may take the door deal with off and type of hold the circle on the screw. Use some painter’s tape to maintain it from rotating.

Drape the beginning of your versatile trim excessive of the circle (you may tape it in place if you wish to) and line up and tape your first straight trim piece for the highest left aspect.

It needs to be 3.5″ in from the sting of the door and the tip of the trim wants to hold all the way in which down to only contact the wood circle.

Now that your straight and flex trim are lined up on the circle, mark a straight line with a pen or pencil the place the straight trim hits the highest of your flex molding, all the way in which all the way down to the place it hits your wood circle. Now you have got your angle to chop!

Once I went to chop the straight trim on my miter noticed, I spotted fairly rapidly that the angle I wanted to chop was larger than 45°, which is the max angle for many miter saws. Fortuitously, there’s a trick to get your noticed to chop greater than 45° (which you’ll absolutely see on this video).

However, you mainly clamp or glue a scrap piece of wooden onto your noticed, make a forty five° minimize, after which preserve that minimize board clamped in place such as you see above and you employ that as your new information.

Once I rotated my noticed angle again in direction of the center to the 25° mark, that gave me a 70° angle (45° + 25° = 70°) which lined up with the angle I had drawn and that’s how I discovered what angle I wanted to chop.

To chop the reverse angle for the opposite aspect, you may both minimize one other 45° to mount to the opposite aspect of your noticed and reverse the method, or you may flip the trim the other way up and it’ll minimize a mirror angle.

Desire a tremendous easy (no energy noticed) option to do it? All you need to do is use a hand noticed to eyeball it and noticed straight throughout the road you drew the most effective you may.

Will it’s good? No, however will probably be fairly shut and you should utilize wooden filler to fill in any areas the place it didn’t completely line up.

Now that you’ve your deep angles minimize in your straight sides, tape them again in place whereas your versatile trim remains to be draped over your circle and mark with a pen/pencil the place the straight trim overlaps the flex trim (so you understand the place to chop your flex trim).

It’s doable to chop flex moulding on a miter noticed, however from expertise, I’d solely try this with straight items. Typically, you should purchase them pre-bent like I did, which makes dealing with them across the circle simpler.

Reduce it very slowly and punctiliously—it tends to maneuver or bounce again because it’s type of a rubbery materials.

Total, I’d suggest shopping for items pre-bent like mine and utilizing a craft or hand noticed to make the minimize because it’s such a steep angle and that materials is finicky with a miter noticed. Simply eyeball the road you made and noticed by way of it to make the minimize.

You can even use a heavy responsibility X-Acto knife and make a lot of cuts, however watch out to not minimize your self because the materials is quite dense.

As soon as your flex moulding is minimize, you may put your puzzle items collectively as proven to verify they match! Now repeat for the underside part of trim.

As soon as you might be pleased with that, you may minimize the peak of your straight items to additionally hit 3.5″ from the highest and backside of the door at mirroring 45° angles so you may add a smaller piece of straight trim to attach them.

Repeat the method with every of your doorways—you should utilize the items you already minimize as a template to make it go quite a bit sooner).

As soon as they’re taped in place and also you be certain they’re all degree with the door edges, use a end nail gun to connect the trim to the door. You can even put down a bit of wooden glue first between the trim and door if you need for additional maintain.

As soon as your trim is connected, it’s time to fill any nail holes with wooden filler and sand clean when dry, caulk the place the trim meets the door for a seamless look, and paint the doorways so all of it matches.

You can even use the wooden crammed to fill any gaps the place your trim didn’t line up completely, and that helps all of it appear to be one unit as properly.

For the reason that IKEA doorways are laminate, you’ll need to use this primer earlier than you paint. It is going to assist the precise paint keep on with the laminate, and also you gained’t must sand the doorways earlier than portray.

I used Melting Icicles by Behr to match the white that IKEA furnishings is available in, and it’s a very nice match to your closing coats of paint. I used a spindle brush for the trim components and a small curler for the flat areas.

As soon as your paint is dry, your custom-made IKEA Pax cupboards are able to fill and use!

I actually really feel like including the trim to the doorways brings the entire wardrobe as much as one other degree. It makes it look so customized and luxe and I completely adore it.

You may customise your trim to be no matter form you need, however this Parisian really feel matches my house completely. If you’re about so as to add an IKEA Pax wardrobe to your area, do this customized trim concept to make it a bit of extra stylish and I feel you’ll be so glad you probably did. xo Laura

For extra door concepts, try: