Organized Craft Room Pegboard Storage

Add pegboard storage to create an organized craft room that’s each practical and delightful!

Lavender pegboard holding organized craft supplies

Just a few weeks in the past, I used to be serving to clear out an outdated constructing that was donated to my mother and father’ non-profit when I discovered one thing that acquired me fairly excited.

Tucked behind the basement, behind a bunch of different stuff we have been transferring round was an enormous, outdated inexperienced pegboard.

old green pegboard that is dusty and in need of a makeover

It was destined for the trash, however I knew it might be the proper means so as to add some a lot wanted storage to my craft room / residence workplace, so I introduced it residence and rescued it. It might have began out fairly tough, however I had massive plans for it!

Organized pantry with decanted baking items, pasta, and spices

Seize our free organizing information, 7 Easy Beginning Factors!

This fast information offers you 7 easy, sensible methods to start to deal with an awesome organizing venture. (And when you get began, the momentum will enable you to hold going till it’s full!)

Create Cute Craft Room Pegboard Storage

This publish comprises affiliate hyperlinks. For extra data, see my disclosures right here.

Step 1- Collect your provides.

Earlier than I might flip my ugly, outdated inexperienced pegboard into the lovable craft room storage of my desires, I needed to collect all of my instruments. And should you don’t have an outdated pegboard that you just rescued from an excellent older constructing, don’t fear! You may simply snag one (and it’ll most likely begin out wanting means higher than mine did 😉 ).

Step 2- Minimize the pegboard to measurement, if wanted.

As soon as we had gathered our provides, we began by slicing down the pegbard. This factor was BIG and since I wished it to suit between the bookcases in my new workplace, we sliced off a pair inches right here and there till it was the simply the best measurement.

Donnie used a round noticed to chop it, ensuring to create good, straight traces so our pegboard maintained its excellent rectangle form.

Step 3- Paint the pegboard.

After we had cleaned it up, it was time to color the pegboard! Since my craft room/residence workplace goes to be my girly haven in my home stuffed with boys, I selected Behr’s Rosy Lavender. I couldn’t be extra delighted with how the colour turned out!

using a small foam paint roller to paint a green pegboard Behr Rosy Lavender

To color the pegboard, we used a little bit foam curler and small paint tray. (I feel that my favourite half is that Donnie’s noticed horses at the moment are sprinkled with Rosy Lavender, which can look further masculine when he pulls them out to do his subsequent very manly venture.)

Two coats of paint coated the pegboard fully, and there was no trace of its former olive shade. I adopted up the paint with two coats of Minwax Polycrylic simply to ensure the paint didn’t scrape off once I added my fairly pegboard equipment.

large pegboard painted a light lavender color

Wanting higher already, proper?!

Step 4- Add a body.

Subsequent it was time to border within the pegboard. Much like our framed in toilet mirror, we used items of baseboard molding and minimize them all the way down to the size we wanted.

We used wooden glue to stick the body to the pegboard and clamped it all the way down to let it dry.

pegboard frame attached with wood glue with clamps holding the frame to the pegboard

Anxious that the glue wouldn’t be sufficient, Donnie additionally used wooden screws to connect the body to the pegboard from the underside in order that they have been inconspicuous.

screws on the back side of the pegboard, holding it to the frame

Step 5- Grasp your stunning pegboard!

Once we have been assured that the body wasn’t going to fall off the pegboard, it was time to hold it up!

We wished to ensure the pegboard had loads of assist so it stayed safe on the wall, and it additionally wanted to be out away from the wall a little bit bit so there was room to hold the equipment.

Donnie screwed two 1×4 boards into the studs of the wall to ensure they may maintain the load of the pegboard.

1x4 boards hung on the wall to mount a pegboard

Then utilizing flat wooden screws, we screwed the pegboard to the wooden body behind it utilizing the prevailing pegboard holes.

I gave the trim a couple of coats of shiny white paint, and I had the gorgeous pegboard of my desires!

empty lavender pegboard with a white frame hung on the wall in an organized craft room / home office

Step 6- Add equipment and manage!

I had already determined which of my craft provides I wished to retailer on the pegboard and sought out the proper equipment to carry them.

lavender pegboard holding organized craft supplies in a home office

I used a small dowel rod to carry my ribbon and little pails from Goal’s Greenback Spot with pegboard hooks to carry varied writing utensils. The hampers holding my paint and modge podge have been from IKEA and are sadly not offered.

There are a ton of cute pegboard equipment on the market, so I’m certain you’ll be capable of discover the proper ones to carry your provides as nicely! Listed here are just some favorites…

Favourite Pegboard Equipment