How to Transform a Builder-Grade Vanity

Learn to remodel a builder-grade vainness with paint and new {hardware}, giving the toilet an elegant, up to date look!

Once we moved into our home six years in the past, it wasn’t precisely fairly. Certain, the home was in a fantastic location and was the right measurement for our little household, however cosmetically, it wanted some assist.

The vainness in our major bed room/lavatory, for instance, was type of an eyesore with its low-cost faux-wood end.

I’d have beloved to simply rip it out and exchange it, however since we’re in a townhouse, now we have awkward plumbing that runs to the aspect relatively than to the again, and discovering a brand new vainness that may work for this area could be tough, to not point out costly.

Since changing the vainness would have been tough, we opted for a way more cheap possibility: paint. Shortly after we moved in, I painted the vainness black and framed within the mirror above it. That really made the area slightly higher… for a short time. Just a few years later although, it was trying fairly beat up and in want of some TLC but once more.

Remodeling a Builder-Grade Toilet Vainness with Paint

This publish accommodates affiliate hyperlinks. For extra data, see my disclosures right here.

I’ve discovered extra about my adorning model since first portray this vainness, so I knew I wished to go lighter and brighter than the present black.

Just a few months in the past I did slightly grey and gold console desk makeover for my sister, and ever since then I’ve been in search of a method to incorporate some kind of grey and gold piece into our dwelling as a result of I beloved the colour combo a lot.

As a substitute of simply repainting the vainness black then, I made a decision to go along with Behr’s Iron Mountain so I might get the grey and gold look I wished.

Earlier than I might get portray although, I wanted to assemble my provides…

Prepping the Toilet Vainness for Paint

With my paint shade chosen, it was time to get to work on prepping the floor for paint.

The primary time I painted the vainness and was working with a slippery fake wooden floor, I cleaned the entire thing with light cleaning soap and water, then primed it with Zinsser B-I-N, which is a heavy responsibility primer. I used to be then ready so as to add a couple of coats of paint, and it caught properly to the floor.

Since I used to be beginning with a floor that was already painted this time, I didn’t must prime once more. I simply eliminated the {hardware} and used a lightweight sandpaper to scuff up the floor slightly bit. I cleaned the bottom of vainness properly with delicate cleaning soap and water.

The bottom of the vainness was able to go, however I eliminated the doorways so I might replace the hinges and work on…

Filling {Hardware} Holes

I had been utilizing pulls that required two holes for set up, however my new {hardware} solely wanted one gap. So earlier than I might begin portray, I needed to fill one of many holes on every cupboard.

To fill the holes we used wooden filler (though our cupboard was an affordable laminate).

As soon as the holes had been crammed, we sanded them down till they had been completely clean. Then I used to be positive to wash the doorways very well earlier than I began portray.

Portray the Toilet Vainness

I used a brush to color the beveled edges and sides of the vainness doorways. However for the entire flat surfaces, I used a small foam curler to get a pleasant, clean end.

I did two coats of paint simply to ensure I used to be overlaying up the black utterly, and I used to be completely thrilled with how the colour turned out!

To present the vainness a protecting end, we waited till it was utterly dry, gave it a lightweight sanding, wiped it down, after which utilized polycrylic to the floor. It will hold the paint from chipping and carrying off.

Toilet Vainness Hinges and {Hardware}

As a result of I’m low-cost resourceful 😉 , I used the hinges I already had and spray painted them gold. As soon as they had been dry, I used to be ready to make use of them to reattach the doorways to the vainness.

I discovered the right pulls at Pastime Foyer and snagged them for $2.50 a chunk because it was 50% off day– yippee! I don’t assume they carry these actual pulls anymore, however they at all times have a collection of distinctive and exquisite knobs and pulls there.

As soon as the {hardware} was put in, our vainness makeover was full!

Builder-Grade Toilet Vainness Transformation: Last Ideas

I’m at all times amazed at how one thing so simple as paint can remodel a chunk like this! After eliminating the black on the vainness, I’m itching to repaint the mirror body as properly, so that may in all probability find yourself trying totally different quickly too.

(Oh hey there, Abby taking photos! That’s the robust factor about mirror photos– it’s exhausting to get out of the shot!)

Let’s check out the earlier than and after! (At all times my favourite half!)

I’d say it’s slightly higher! 🙂 I believe the vainness space now suits in properly with the remainder of our major lavatory, which we completely demolished right down to the studs and constructed again up final 12 months…

Toilet upgrades could be robust, however they don’t at all times must be costly– paint and new {hardware} can do wonders to remodel a builder-grade vainness!

Need to save this publish to revisit later? You’ll want to pin the picture under so you’ll find it simply!

Have you ever executed any enjoyable lavatory upgrades these days?

Thanks a lot for following alongside! Have an exquisite day!

This publish accommodates affiliate hyperlinks. For extra data, see my disclosures right here.