How to Build a Custom Tilt-Out Trash Cabinet

How to Build a Custom Tilt-Out Trash Cabinet

Learn to construct a DIY tilt-out trash cupboard on a funds so you’ll be able to disguise these ugly rubbish cans as soon as and for all!

Child Opening a DIY Tilt-Out Trash Cabinet

I’m a professional at developing with undertaking concepts… largely concepts that I want Donnie to assist me execute. (He loves it, I promise! 😉 ) Whereas we had been engaged on the kitchen, I had loads of stated concepts, together with one to construct a customized cupboard to cover our trash can (as a result of actually, who needs to have a look at a trash can?!).

As I normally do, I saved sending Donnie pictures and hyperlinks to plans for such a cupboard till he agreed to construct it. 🙂 As a result of he’s superior, he whipped up the most effective customized cupboard ever, AND it even matches the remainder of our kitchen completely– woot!

Since Donnie is the one which put all of it collectively, I’m going to let him share the how-to. Right here he’s….

Constructing a DIY Tilt-Out Trash Cupboard

An enormous because of Elmer’s for sponsoring this publish! Our favorable opinion of top of the range merchandise that assist us construct superior issues is 100% our personal. 🙂 This publish accommodates affiliate hyperlinks. For extra info, see my disclosures right here.


Once we started our kitchen transform, we knew we had been going to should do one thing in regards to the trash can– our previous one was stained and dented and simply needed to go.

Whereas we’d have liked to have had room to work the trash can into the cupboards that had been already a part of the kitchen plan, area prohibited us from doing so, so we got down to construct a customized cupboard of our personal.

Like Abby all the time does, she discovered the right plan for a customized constructed tilt-out trash can cupboard on Ana White’s unbelievable DIY weblog. (When you’re on her website, try her progress on her Alaskan cabin!)

I shortly appeared over the plan and agreed to present it a shot. I’m no cupboard builder, however I do know the best way to measure and minimize wooden. Paint and wood-filler can disguise lots of errors!

We determined to switch the plan and provides it a extra customized look through the use of a cupboard door that matched the remainder of our kitchen moderately than constructing a generic door that was a special type.

For this sort of customized undertaking, I like to recommend buying your superb measurement/type trash can first after which constructing a tilt-out cupboard round that measurement. Our native Goal had a dozen or so trash can measurement choices, and the big rectangular trash cans appeared to work finest.

Organized Garage

7 Easy Beginning Factors: A Information to Beginning an Overwhelming Organizing Challenge

Click on the button under to request your copy of the free information, and prepare to get organized!

Tips on how to Make a DIY Trash Can Cupboard Step-by-Step

Instruments and Provides You’ll Want

1. Select the cupboard door sized on your rubbish can + lumber.

Step one was deciding what measurement cupboard door would work finest for this undertaking. We ended up with a 21” x 30” door, and that ended up being excellent for a massive measurement rubbish can. Relying on the scale of your area, you could desire a smaller or bigger completed undertaking.

See also  Removable Tile Backsplash (My Mini Kitchen Refresh!)

On the dwelling enchancment retailer, I didn’t notice I’d have so many 1×12 choices. I knew that my undertaking can be painted, so I used to be extra involved with discovering straight boards that had been knot-free. I ended up with some very nice pine boards– not the only option for high-end furnishings, however the excellent worth level for this rubbish can undertaking.

2. Measure the lumber for the tilt-out trash cupboard.

When making ready to chop the 4 sides of the cupboard body out of 1x12s, I used the cupboard door measurements and added an 1/8” to every facet. This ensured that I had loads of room for the slender hinges and freedom of motion to open and shut the tilt-out cupboard.

I can’t overemphasize how vital it’s to get your preliminary dimensions and cuts simply excellent. There was no method to alter the scale of the cupboard door, so I had to verify the cupboard body would create an ideal match. I used a pencil and paper to sketch all the things out. Measure twice, minimize as soon as! I additionally made positive I left sufficient room on the backside of the cupboard for the 1×3 toe kick.

As soon as I had the 4-sided body of 1x12s measured and minimize, I double checked my dimensions yet one more time. I even went so far as to carry all the things up towards my cupboard door to verify my math wasn’t off. After this triple verification, I began making my pocket holes to attach the body collectively.

3. Drill the pocket holes.

close up of a pocket hole
pocket gap

This was my first time utilizing a Kreg Jig package, and man was it enjoyable! I purchased the least costly mannequin, and it was excellent for my wants. The included instructions make getting an ideal pocket gap a breeze.

a clamp on a piece of wood for a tilt out trash can
Kreg Jig

4. Glue the joints collectively.

After I drilled the pocket holes (I did three per facet), I used a beneficiant quantity of Elmer’s Carpenter’s Wooden Glue on the joints earlier than screwing all the things collectively.

If you realize something about cabinetry and even trim work, you realize that wooden screws can pull free over time and create an unpleasant, flimsy hole in your undertaking. The one method to make that excellent joint that by no means separates is with screws and wooden glue.

If I’m portray a undertaking I all the time use the common Elmer’s Wooden Glue, but when it’s a staining undertaking I all the time be sure to make use of their Wooden Glue Max product. It has some actual wooden fibers within the glue.

See also  How to Install Under Cabinet Lighting in the Kitchen Using LED Light Strips

I’ve discovered that even after wiping away the surplus that wooden fibers settle for some stain. You find yourself with nicer completed undertaking with out bizarre gentle spots that inferior model wooden glue can go away.

two bottles of Elmer's wood glue

I used to be actually impressed with how simple it was to create extremely sturdy joints with the Kreg Jig and Elmer’s Wooden Glue. Simply having the 4 1x12s collectively with out another structural help, the cupboard felt rock-solid. I’m now an enormous pocket gap fan.

With the trash can cupboard, I believed it made probably the most sense to depart the again open for cleansing and straightforward removing of the trash can if want be. In case your circumstances are completely different and also you need a again, a bit of finish-grade plywood ought to do the trick. To me, it was pointless weight and expense.

5. Assemble the end boards for the tilt-out trash cupboard.

After the 4 cupboard sides had been joined, it was time to connect the varied 1x3s and 1x2s trim items to present the cupboard a completed look.

I adopted the very same course of as earlier than — measure twice, minimize as soon as, connect with the pocket gap methodology and Elmer’s Wooden Glue. At this stage I discovered that bar clamps had been useful in holding the small trim items in place whereas I mounted the joints.

Right here’s the place I used my 1x3s:

  • Backside toe-kick
  • Rear base trim
  • Beneath the highest entrance ledge

Right here’s the place I used my 1x2s:

  • Cupboard prime overhanging “lip”
  • Back and front sides
  • Prime again piece
labeled picture showing where all the wood pieces should go for the trash cabinet

That will sound complicated but it surely actually wasn’t. Check out our image in addition to the Ana White plan, and it’s fairly apparent the place every bit goes.

6. Apply wooden filler if wanted.

One other profit to utilizing pocket holes is that you just don’t have a bunch of nail or screw holes on the entrance floor of your undertaking. I did have a spot or two the place my trim items got here collectively (I’m not a professional) and for these I shortly crammed them with Elmer’s Wooden Filler.

7. Sand the cupboard.

As soon as the trim items had been hooked up and glued, I made positive to sand down the cupboard with my orbital sander. This cheap software actually is useful for these woodworking-type initiatives.

8. Prime and paint.

I really get pleasure from listening to podcasts with my headphones whereas I let the facility sander do all of the work. I labored my method down progressively, beginning with a a course sand paper and transferring to a really nice sandpaper. This gave me a pleasant clean floor for primer and paint.

9. Lower and assemble the lean door.

As soon as the cupboard “field” was painted, it was time to work on the tilt-out cupboard door. You may see within the image that that I minimize two 1x12s at a forty five diploma angle with my chop noticed (a desk noticed or round noticed would work as nicely) for the angled sides. I then made a straight minimize on a 1×12 for the rubbish can resting spot.

three pieces of cut wood to use for the inside of the garbage cabinet

I now had two separate items of the undertaking — the cupboard body and the tilt-out cupboard door. Place the door into the cupboard body to verify all the things matches. (I held my breath for this.)

See also  Before and After: A New Build Guest Bed and Bath Goes From Basic to Beautiful

10. Screw on the hinges.

When deciding on hinges for the undertaking, I thought of a 12” lengthy piano type hinge, however I ended up shopping for two slender hinges that had been smaller however appeared barely thicker and extra sturdy than the flexible piano hinges. I believe that both would work simply nice.

First I positioned the hinges on the cupboard body and traced them with a pencil. Then I used a wooden chisel to create barely recessed seat for the hinges. I may have skipped this step, however the recessed hinges allowed for a greater match. It will’ve been a little bit too tight with out the recess for the hinges.

I made a decision to not create the identical indent or recessed spot on the cupboard door due to the a lot tougher materials of the cupboard entrance. After creating the indent on the cupboard body, attaching the hinges with the offered wooden screws was simple.

close up of hinges on the inside of the cabinet

11. Add the drawer pull for the tilt-out trash cupboard.

We used a drawer pull that matched the remainder of our kitchen for the deal with, and the undertaking was full!

This actually is the kind of undertaking that anybody can do. For woodworking, the joinery facet is all the time probably the most tough for me, however I’ve a lot extra confidence now that I’ve found the power of pocket gap + Elmer’s Wooden Glue mixture.

opening the custom tilt-out trash can cabinet


So superior, proper?! He tries to drag the, “I don’t know if I’m expert sufficient to construct this…” line, however I do know higher– his initiatives all the time end up fantastically!

Prep Time

Lively Time
4 hours

Whole Time
4 hours half-hour


Estimated Value

Really useful Merchandise

As an Amazon Affiliate and member of different affiliate applications, I earn from qualifying purchases.

Have you ever completed any DIY constructing initiatives currently? I’d love to listen to about them within the feedback!

[Psssttt… Get our top 100 tips for organizing every room of the house here!]

Have an exquisite day, mates!

Abby Lawson, Just a Girl and Her Blog

An enormous because of Elmer’s for sponsoring this publish! Our favorable opinion of top of the range merchandise that assist us construct superior issues is 100% our personal. 🙂 This publish accommodates affiliate hyperlinks. For extra info, see my disclosures right here.

Source link