Hello everybody! It’s been some time since my final publish, and lots has has occurred in that point.
The most important information of all has obtained to be the conversion of our man cave right into a nursery for my 1-year-old son!
A lot to my husband’s dismay, in fact … he did love that man cave, however sacrifices need to be made when you might have youngsters! You’ll be able to see my nursery reveal right here.
Associated: Discover extra DIY house decor initiatives right here.
As you’ll be able to see, the room is kind of small (within the UK, the third bed room is often fairly small and we frequently jokingly seek advice from it as a “field room”), which meant there wasn’t a lot area for the larger necessities like a wardrobe.
Not that I minded—I discover wardrobes to be like cumbersome outsized bins. So, I made a decision to create a DIY hanging rail from the ceiling!
It seems so mild and minimal however nonetheless holds loads of garments. And, in fact, child garments are *the* cutest, so this DIY rail ended up wanting aesthetically pleasing, too!
Provides Wanted:
–department/driftwood or dowel rod
–robust wire/rope
–ceiling hooks
-scissors
-drill
-sandpaper (non-obligatory)
Tutorial:
Determine how lengthy you need your clothes rack to be and minimize your department/dowel rod all the way down to this dimension. I minimize mine to the size of the drawers in order that the rail can be suspended above and line up properly.
Drill a gap into each the ends of the department that’s sufficiently big to your rope/wire to suit by means of. Sand across the holes if wanted to clean issues out and make it simpler to go the rope/wire to undergo.
Now, repair your ceiling hooks in utilizing wall plugs (wall anchors). Bear in mind to mark exactly the place the holes are in your department/dowel rod and area the ceiling hooks at precisely the identical distance.
Once more, I used the dresser as my marker for spacing! However I additionally used some masking/Frog Tape to mark the place the holes would should be drilled in. It’s a easy however helpful approach of making certain precision.
Please observe in case you’re in a rental the place you aren’t enable to attract holes, this department might be hung with heavy obligation self adhesive hooks.
Nonetheless, It might significantly restrict how a lot you could possibly grasp on the rail and can be extra for aesthetic functions relatively than operate.
Subsequent, minimize two items of rope to the specified size. Ensure you have slightly further rope to make room for any errors. The additional can all the time be trimmed later!
Thread your rope by means of one finish of the the department and make a knot. Do the identical with the opposite aspect.
On the prime of the rope, make a loop knot.
Dangle it up on one of many ceiling hooks and trim any extra rope.
Now, grasp the opposite finish of the department on the opposite hook and tie a loop knot on the finish of the rope. This is usually a little difficult, as it’s worthwhile to be sure the department itself hangs stage.
And also you’re accomplished! I’ve put mine up excessive sufficient in order that there’s room to carry my son’s longer clothes, like his bedtime onesies. And though I haven’t obtained many garments hanging up within the footage, it may well truly maintain 2-3 instances extra!
What do you suppose? Is that this one thing you suppose you’ll attempt? xo, Medina
You’ll be able to comply with me on my weblog, Instagram, and TikTok!
P.S. Love this publish? Take a look at Hanging Copper Pipe Clothes Rack DIY.
For extra crafts like this one, don’t neglect to subscribe!
Be a part of Now
Get inventive concepts for recipes, crafts, decor, and extra in your inbox!
Print
Get the How-To
Tips on how to make a DIY hanging rail from the ceiling!
Directions
-
Determine how lengthy you need your clothes rack to be and minimize your department/dowel rod all the way down to this dimension. I minimize mine to the size of the drawers in order that the rail can be suspended above and line up properly.
-
Drill a gap into each the ends of the department that’s sufficiently big to your rope/wire to suit by means of. Sand across the holes if wanted to clean issues out and make it simpler to go the rope/wire to undergo.
-
Now, repair your ceiling hooks in utilizing wall plugs (wall anchors). Bear in mind to mark exactly the place the holes are in your department/dowel rod and area the ceiling hooks at precisely the identical distance.
-
Once more, I used the dresser as my marker for spacing! However I additionally used some masking/Frog Tape to mark the place the holes would should be drilled in. It’s a easy however helpful approach of making certain precision.
-
Subsequent, minimize two items of rope to the specified size. Ensure you have slightly further rope to make room for any errors. The additional can all the time be trimmed later!
-
Thread your rope by means of one finish of the the department and make a knot. Do the identical with the opposite aspect.
-
On the prime of the rope, make a loop knot.
-
Dangle it up on one of many ceiling hooks and trim any extra rope.
-
Now, grasp the opposite finish of the department on the opposite hook and tie a loop knot on the finish of the rope. This is usually a little difficult, as it’s worthwhile to be sure the department itself hangs stage.
Notes
- I put mine up excessive sufficient in order that there’s room to carry my son’s longer clothes, like his bedtime onesies. And though I haven’t obtained many garments hanging up within the footage, it may well truly maintain 2-3 instances extra!
L