Learn to make a DIY framed mirror in your lavatory in only a few straightforward steps!
Our townhouse is the definition of “has good bones, however wants a number of assist cosmetically.” We knew that once we moved in and have been engaged on reworking your complete home one room at a time. I’m thrilled to say that we’ve lastly made it to my little haven, our major bed room.
After we first began engaged on our major bed room, one undertaking I knew I wished to finish was framing within the self-importance mirror. It’s a reasonably easy undertaking, so I used to be excited to make a huge impact with out an enormous quantity of labor.
We began out with simply your common, plain, builder-grade mirror:
However I knew we might give it just a little facelift with this straightforward DIY framing undertaking! Right here’s how we did it…
7 Easy Beginning Factors: A Information to Beginning an Overwhelming Organizing Undertaking
Click on the button beneath to request your copy of the free information, and prepare to get organized!
Tips on how to Body a Toilet Mirror Step-by-Step
This submit incorporates affiliate hyperlinks. For extra data, see my disclosures right here.
1. Collect your provides.
The very first thing we did was be sure we had all the instruments and provides needed to border within the lavatory mirror.
DIY Framed Mirror Provides and Instruments
2. Make your cuts on the baseboard items.
After we had gathered our provides, we would have liked to chop down the baseboards we have been utilizing to assemble the body for the mirror.
We measured the outer dimensions of our mirror and used the miter noticed to chop our baseboard items at a 45-degree angle, with the surface edge the identical dimensions because the mirror.
The within size of baseboard ended up shorter than the size of the mirror to compensate for the angle minimize. After we completed reducing our baseboard items, they regarded like this:
3. Double verify the minimize boards.
After the framing items have been minimize, we double checked to ensure they match by bodily holding them up in opposition to the mirror earlier than we did anything. We didn’t need to make it additional alongside within the course of, solely to comprehend that we had the improper sizing for our body!
4. Make notches for the mirror clips (if relevant).
At this level, we additionally needed to alter our framing items for the mirror clips. Oh, the clips…
In case your mirror was hung with out clips, you win! Go get your self a prize! 😉
Since our mirror did, in actual fact, have clips, we needed to mark our baseboard items on the spot the place the clips hit. Then we have been in a position to chisel out a notch for the clips in order that our body would sit flush in opposition to the mirror.
Donnie used a pointy 1/2″ wooden chisel to create the notches– it solely took a couple of minutes!
5. Assemble the body for the mirror.
Now that our baseboards have been minimize and chiseled, they have been prepared to connect! We used Liquid Nails to stick the framing items collectively. Then we duct taped the corners to carry them in place whereas they dried in a single day.
6. Add shoe molding, if desired.
You don’t have so as to add shoe molding in the event you favor a flatter face in your mirror body. We wished so as to add some dimension and thought it gave our body a extra completed look, so we determined so as to add the layer of shoe molding to the bottom of the body.
As soon as we measured and minimize our molding, once more utilizing a 45-degree angle, we used wooden glue to stick the molding to the body.
We then clamped the molding to the baseboard items to make sure that they might adhere. (For those who run out of clamps, you’ll be able to simply begin stacking stuff on the items like we did. 😉 )
We have been certain to permit the glue to dry utterly earlier than we did anything to the body.
7. Paint and cling the DIY mirror body.
When the wooden glue had completed drying, it was time to color. I attempted to take the straightforward route and simply paint the entrance of our body. However I quickly discovered that because the mirror is reflective (duh!), we might see the the edging of the again of the body, so we would have liked to color either side.
As soon as our coats of paint have been utterly dry, we hung the body on the mirror utilizing Liquid Nails.
- Don’t unfold the Liquid Nails too near the within fringe of the body or, once more, it is possible for you to to see it within the mirror’s reflection.
- As soon as our mirror was affixed, we used masking tape to assist maintain it to the wall in a single day whereas the Liquid Nails dried.
8. Take pleasure in your newly framed Toilet Mirror!
Within the morning, I nervously pulled off the masking tape, hoping not one of the paint would include it. It didn’t, I used to be relieved, and I had a gorgeous framed-in mirror that I simply cherished! Completely satisfied dance!
Simply because it’s my favourite a part of any transformation, let’s check out the earlier than and after!
Love! I’m at all times amazed at how such a easy undertaking can find yourself making an enormous distinction within the area. When you have a builder grade lavatory mirror that would use just a little pick-me-up, this can be a nice undertaking to strive! (You’ll be able to be taught extra about how we remodeled the underside a part of the self-importance right here.) We hope this tutorial can be useful for you!
Wish to save this submit to revisit later? Make sure you pin the picture beneath so yow will discover it simply!
Have you ever accomplished any enjoyable DIY initiatives these days?
Thanks a lot for following alongside! Have a beautiful day!
Disclaimer: We’re not skilled carpenters, simply owners who like to DIY every time potential! Please be secure and try all initiatives at your personal danger.
This submit incorporates an affiliate hyperlink. View my disclosures right here.